Location » Home » Grades > Stainless Steels - Special Steels > X10CrAl7,1.4713,X10CrAlSi7

DIN X10CrAl7,1.4713,X10CrAlSi7 Details

X10CrAl7,1.4713,X10CrAlSi7 Application:Heat resisting steels and nickel alloys

Category Type Grade Microstructure Designations
Grades Stainless Steels - Special Steels X10CrAl7,1.4713,X10CrAlSi7 Ferrite Germany - DIN , EN 10088-1 - Stainless steels - Part 1: List of stainless steels
EN 10095 - Heat resisting steels and nickel alloys

Chemical composition(wt.%) of X10CrAl7,1.4713,X10CrAlSi7 grade: EN 10088-1

Elements Min.(≥) Max.(≤)
C - 0.12
Si 0.50 1.00
Mn - 1.00
P - 0.045
S - 0.015
Cr 6.00 8.00
Ni - -
Al 0.50 1.00

Mechanical properties of grade X10CrAl7,1.4713,X10CrAlSi7 EN 10088-1

Yield Strength,Rp 0.2(MPa)

Condition Min Max Similar Note
220

Tensile Strength,Rm(MPa)

Condition Min Max Similar Note
420 620

Impact,Kv/Ku(J)

Condition Min Max Similar Note

Elongation,A(%)

Condition Min Max Similar Note
15

Reduction of area,(%)

Condition Min Max Similar Note

Hardness

Condition Type Min Max Similar Note
HB 192

Physical properties of grade X10CrAl7,1.4713,X10CrAlSi7 EN 10088-1

Specific resistance, Ω Note
0.70 mkOhm * m
Linear expansion coefficient, α Note
11.5 - 13.0 * 10-6 K-1
Thermal conductivity, λ Note
23.0 W * m-1 * K-1
Thermal capacity, cp Note
450 J * kg-1 * K-1

Related properties

500℃ - Creep strength, Rz/1000 (MPa) 160
600℃ - Creep strength, Rz/10000 (MPa) 35
700℃ - Creep strength, Rz/100000 (MPa) 5
800℃ - Creep limit, R1/1000 (MPa) 3.7
900℃ - Creep limit, R1/10000 (MPa) 1.0

Heat resisting steels and nickel alloys

Application    

X10CrAl7,1.4713,X10CrAlSi7 is a ferritic heat-resistant steel showing resistance to sulfur compounds, reducing and carburizing gases, which can operate in temperatures up to 800 in a non-aggressive environment.It is used in the production of load-bearing elements, parts of steam boilers, construction of soot blowers, supports for heaters, hubcaps, sliding rails, chains and sieves, parts in the automotive, energy and metallurgical industries.

Similar Steel Grades

4713, SICROMAL, X 10 CRAL 7, X 10 CRALSI 7, X10CRSI6, X 10 CRSI 6, 1.4712, CSN 17113, 15CH6SJU, 15Х6СЮ, 10ALCR70.

X10CrAl7,1.4713,X10CrAlSi7 - Form of Supply

Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED

Cross Reference Table(Equivalent Grade)

Grade Standard Country Application
X10CrAlSi7 B.S. UK
Heat resisting steels and nickel alloys
1.4713 B.S. UK
Heat resisting steels and nickel alloys
X10CrAl7,1.4713,X10CrAlSi7 DIN Germany
Heat resisting steels and nickel alloys

Enquiry