Location » Home » Grades > Superalloys > Incoloy 800

UNS Incoloy 800 Details

Cr content is usually 15-25% of the 800 alloy, nickel content is 30-45%, and contains a small amount of aluminum and titanium.800 alloy from high temperature fast cooling after all in a single austenite zone, therefore, using a state as a single austenitic organization.Alloy has the high chromium content and plenty of nickel content, so a higher resistance to high temperature corrosion performance, more in industrial application.In the chloride, low concentration of NaOH aqueous solution and high temperature and high pressure water, has good resistance to stress corrosion cracking performance, so the equipment used in the manufacture of resistance to stress corrosion cracking Incoloy800 similar brands China: 0 cr20ni32alti America: No8800 Japan: NCF800 west: X2NiCrAlTi3220 Incoloy800 nuclear generator application fields of chemical industry Nitric acid cooler, acetic anhydride, cracking tube heat exchange equipment heat exchange

Incoloy 800 Application:Equipment used in the manufacture of resistance to stress corrosion cracking
Category Type Grade Designations
Grades Superalloys Incoloy 800 USA - UNS , ASTM B409 - Stainless steel hot rolled steel plate
ASTM B514 - Stainless steel cold rolled steel sheet
ASTM B515 - Stainless steel/acid steel cold rolling belt
Chemical composition(mass fraction)(wt.%)
Elements Min.(≥) Max.(≤)
C - 0.10
Si - 1.00
Mn - 1.50
P - 0.030
S - 0.015
Cr 19.00 23.00
Ni 30.00 35.00
Fe - Bal
Mechanical properties of grade Incoloy 800
Proof strength
Rp0.2 (MPa)
Tensile strength
Rm (MPa)
Impact energy
KV (J)
Elongation at fracture
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
964 (≥) 349 (≥) 14 13 24 Solution and Aging, Annealing, Ausaging, Q+T,etc 121
Physical properties of grade Incoloy 800
Property Density
kg/dm3
Temperature T
°C/F
Specific heat
J / kgK
Thermal conductivity
W/mK
Electric resistance
µΩ·cm
Modulus of elasticity
kN/mm2
Expansion rate
687 (≥) 943 (≥) 32 12 11 Solution and Aging, Annealing, Ausaging, Q+T,etc 213
Temp.
°C/°F
Creep strain limit
(10000h)
(Rp1,0) N/mm2
Creep rupture strength
(10000h)
(Rp1,0) N/mm2
978 291 294
Incoloy 800 Range of products
Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
Incoloy 800 UNS USA
Equipment used in the manufacture of resistance to stress corrosion cracking

Relevant products

Incoloy 800 Equivalent Grade Stock

Steel grade Dimension Shape Unit Quantity Delivery state Query
Incoloy800 round bar Φ115*1400 Round Bar Kgs 169 Hot-Rolled+Annealed+black Enquiry

Enquiry