CSN 05 5394Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 05 5394 | CSN | Czech Republic |
Chemical composition%of the ladle analysis of grade05 5394
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | N(%) |
|---|---|---|---|---|---|---|---|
| 0.04-0.12 | 0.12-0.40 | 0.95-1.35 | 0.020 | 0.020 | Max 0.15 | 2.30-2.80 | 0.15 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 439(≥) | 983(≥) | 12 | 44 | 11 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 212 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 798(≥) | 467(≥) | 24 | 41 | 31 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 233 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 212 | 386 | 499 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| F10005 | CSN | Czech Republic | Used in the products of the automobile, truck, tractor, and allied industries; small cylinder blocks, cylinder heads, air cooled cylinders, pistons, clutch plates, oil pump bodies, transmission cases, gear boxes, clutch housings, and light-duty brake drum |
| T72305 | CSN | Czech Republic | Carbon tool steel |
| 205 | CSN | Czech Republic | Stainless steel and heat resistant steel |
| ASTM 205 | CSN | Czech Republic | Stainless steel and heat resistant steel |
| S20501 | CSN | Czech Republic | Stainless steel and heat resistant steel |
| 305 | CSN | Czech Republic | Stainless steel and heat resistant steel |
| A 167 Type 305 | CSN | Czech Republic | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 240 Type 305 | CSN | Czech Republic | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 TP305 | CSN | Czech Republic | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 276 305 | CSN | Czech Republic | Stainless Steel Bars and Shapes |
| A 313 Type 305 | CSN | Czech Republic | Stainless Steel Spring Wire |
| A 314 305 | CSN | Czech Republic | Stainless Steel Billets and Bars for Forging |
| A 368 Type 305 | CSN | Czech Republic | Stainless Steel Wire Strand |
| A 473 305 | CSN | Czech Republic | Stainless Steel Forgings |
| A 478 Type 305 | CSN | Czech Republic | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| A 492 Type 305 | CSN | Czech Republic | Stainless Steel Rope Wire |
| A 493 Type 305 | CSN | Czech Republic | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| A 511 MT305 | CSN | Czech Republic | Seamless Stainless Steel Mechanical Tubing |
| A 554 MT 305 | CSN | Czech Republic | Welded Stainless Steel Mechanical Tubing |
| A 580 Type 305 | CSN | Czech Republic | Stainless Steel Wire |
