CNS CNS NCF800Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | CNS NCF800 | CNS | China |
Chemical composition%of the ladle analysis of gradeCNS NCF800
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Cu(%) | Al(%) | Ti(%) | Other(%) |
|---|---|---|---|---|---|---|---|---|---|---|
| Max 0.10 | Max 1.00 | Max 1.50 | 0.03 | 0.015 | 19.0-23.0 | 30.0-35.0 | Max 0.75 | 0.15-0.60 | 0.15-0.60 | Fe remaining |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 111(≥) | 527(≥) | 14 | 11 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 224 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 328(≥) | 578(≥) | 43 | 12 | 21 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 434 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 772 | 833 | 561 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| HNV5 | CNS | China | Steel for intake valves |
| S63005 | CNS | China | Steel for intake valves |
| Z1CNS17-15 | CNS | China | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
| Z11CNS17-07Az | CNS | China | Stainless steels for general purposes. Plates, wide strips and strips |
| Z15CNS25-20 | CNS | China | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
| Z17CNS20-12 | CNS | China | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
| Z80CNS20-02 | CNS | China | Valve steels and alloys for internal combustion engines |
| NCF800 | CNS | China | Special alloys steel for chemical plant |
| NCF800TB | CNS | China | Seamless nickel-chromium-iron alloy heat exchanger tubes |
| NCF800TP | CNS | China | Seamless nickel - chromium - iron alloy pipes |
| NCF800H | CNS | China | Corrosion - resisting and heat - resisting superalloy plates and sheets |
| NCF800HTB | CNS | China | Seamless nickel-chromium-iron alloy heat exchanger tubes |
| NCF800HTP | CNS | China | Seamless nickel-chromium-iron alloy pipes |
| NCF800HTF | CNS | China | Steel tubes for fired heater |
| NCF800TF | CNS | China | Steel tubes for fired heater |
| NCF800 | CNS | China | CNS Standard heat resistant alloy and corrosion resistant alloy bar and plate type and chemical composition |
| NCF800H | CNS | China | CNS Standard heat resistant alloy and corrosion resistant alloy bar and plate type and chemical composition |