JIS Z10Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | Z10 | JIS | Japan |
Chemical composition%of the ladle analysis of gradeZ10
| W(%) | Co(%) | Other(%) |
|---|---|---|
| 85-95 | 5-15 | Ti,Ta(Nb)(%): 0-3② |
Hardness quartile HRA: 91
Bending strength frequency/MPa:1275
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 178(≥) | 634(≥) | 33 | 31 | 22 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 323 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 326(≥) | 836(≥) | 22 | 22 | 21 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 133 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 363 | 571 | 635 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z10CNDA15-07 | JIS | Japan | Stainless steels for general purposes. Plates, wide strips and strips |
| Z10NC32-21 | JIS | Japan | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
| Z10C3 | JIS | Japan | Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod |
| Z100CD17CI | JIS | Japan | Iron and steel. Cutlery stainless steel |
| Z10CNWT17-13B | JIS | Japan | Steel tubes. Seamless austenitic steel tubes for use at high temperatures. Dimensions (with normal tolerances). Technical conditions of delivery |
| TUZ10CNWT17-13B | JIS | Japan | Steel tubes. Seamless austenitic steel tubes for use at high temperatures. Dimensions (with normal tolerances). Technical conditions of delivery |
| Z10CNT18-11 Air 9160/C | JIS | Japan | wrought steels used in aeronautical constructions |
| Z100CD-17 Air 9160/C | JIS | Japan | wrought steels used in aeronautical constructions |
| ACIER DUR AU CARBONE ETIRE Air 9160/C | JIS | Japan | wrought steels used in aeronautical constructions |
| Z10CNW17 | JIS | Japan | Corrosion Resisting Alloy AFNOR Z10 CNW17 |