S75CM Enquiry | Print this page
JIS S75CM Details
JIS S75CM Standard Download
S75CM Application:Cold rolled special steel strip
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Structural Steel | S75CM | Japan - JIS , G 3311 (2010) - Cold rolled special steel strip |
Chemical composition(wt.%) of S75CM grade: G 3311 (2010)
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.70 | 0.80 | ||
| Si | 0.15 | 0.35 | ||
| Mn | 0.60 | 0.90 | ||
| P | - | 0.030 | ||
| S | - | 0.035 | ||
| Cr | - | 0.20 | ||
| Ni | - | 0.20 | ||
| Cu | - | 0.30 |
Mechanical properties of grade S75CM G 3311 (2010)
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 959 (≥) | 881 (≥) | 44 | 11 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 123 |
Physical properties of grade S75CM G 3311 (2010)
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 851 (≥) | 129 (≥) | 24 | 33 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 422 | 516 | 472 |
S75CM - Form of Supply
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| S75CM | JIS | Japan | Cold rolled special steel strip |
Enquiry
* Required fields