50NiCr13 Enquiry | Print this page
DIN 50NiCr13 Details
DIN 50NiCr13 Standard Download
50NiCr13 Application:Alloyed NiCr steel
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Tool Die Steels | 50NiCr13 | Germany - DIN , |
Chemical composition(wt.%) of 50NiCr13 grade:
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.45 | 0.55 | ||
| Si | 0.15 | 0.35 | ||
| Mn | 0.40 | 0.60 | ||
| P | - | 0.035 | ||
| S | - | 0.035 | ||
| Cr | 0.90 | 1.20 | ||
| Mo | - | - | ||
| V | - | - | ||
| Ni | 3.00 | 3.50 |
Mechanical properties of grade 50NiCr13
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 658 (≥) | 134 (≥) | 42 | 21 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 212 |
Physical properties of grade 50NiCr13
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 184 (≥) | 735 (≥) | 43 | 42 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 324 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 723 | 157 | 117 |
50NiCr13 - Form of Supply
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| 50NiCr13 | DIN | Germany | Alloyed NiCr steel |
Enquiry
* Required fields