N08330 Enquiry | Print this page
AISI N08330 Details
AISI N08330 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | N08330 | Austenite | USA - AISI , |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.15 | ||
| Mn | - | 2.00 | ||
| Si | - | 1.50 | ||
| P | - | 0.045 | ||
| S | - | 0.04 | ||
| Cr | 14.00 | 17.00 | ||
| Ni | 33.00 | 37.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 766 (≥) | 987 (≥) | 11 | 33 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 131 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 954 (≥) | 869 (≥) | 41 | 33 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 441 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 563 | 985 | 831 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| B 511 N08330 | SAE | USA | Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes |
| B 512 N08330 | SAE | USA | Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars |
| B 535 N08330 | SAE | USA | Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube |
| B 536 N08330 | SAE | USA | Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip |
| B 546 N08330 | SAE | USA | Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| B 710 N08330 | SAE | USA | Nickel-Iron-Chromium-Silicon Alloy Welded Pipe |
| B 739 N08330 | SAE | USA | Nickel-Iron-Chromium-Silicon Alloy Welded Tube |
| N08330 | AISI | USA | Ni-Fe-Cr Alloy Solid Solution Strengthened |
| SB-511 N08330 | AMS | USA | Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes |
| SB-535 N08330 | AMS | USA | Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube |
| SB-536 N08330 | AMS | USA | Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip |
| SB-710 N08330 | AMS | USA | Nickel-Iron-Chromium-Silicon Alloy Welded Pipe |
| RA 330 | SAE | USA | Wrought nickel and nickel-related alloys |
| RA 330 | SAE | USA | Special Purpose Alloys ("Superalloys") |
| RA 330 | SAE | USA | Wrought Nickel and Nickel-Related Alloys |
| SUH 330 | JIS | Japan | Stainless steel wires |
| SUH 330 | JIS | Japan | Heat-resisting steel bars and wire rods |
| SUH 330 | JIS | Japan | Heat-resisting steel plate, sheet and strip |
| STR330 | KS | Korea | Heat - resisting steel plates and sheets |
| SUH330 | CNS | China | CNS standard heat resistant steel bar steel grade and chemical composition |