15-5PH Enquiry | Print this page
ASTM 15-5PH Details
ASTM 15-5PH Standard Download
15-5PH Application:High temperature alloys and other special alloys
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 15-5PH | USA - ASTM , SAE AMS 5346C (2006) - Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5) SAE AMS 5347B (2006) - Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5) SAE AMS 5357C (2011) - Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable SAE AMS 5400B (2007) - Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength SAE AMS 5659N (2012) - Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
Chemical composition(wt.%) of 15-5PH grade: SAE AMS 5346C (2006)
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.07 | ||
| Si | - | - | ||
| Mn | - | - | ||
| Cr | 14.0 | 15.5 | ||
| Ni | 3.5 | 5.5 | ||
| Cu | 2.5 | 4.5 |
Mechanical properties of grade 15-5PH SAE AMS 5346C (2006)
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 143 (≥) | 578 (≥) | 41 | 32 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 |
Physical properties of grade 15-5PH SAE AMS 5346C (2006)
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 177 (≥) | 395 (≥) | 24 | 42 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 113 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 985 | 611 | 487 |
15-5PH - Form of Supply
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 564 S15500 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S15500 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S15500 | SAE | USA | Age-Hardening Stainless Steel Forgings |
| S15500 | AISI | USA | Precipitation Hardenable Chromium Nickel Copper Stainless Steel |
| SA-564 S15500 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S15500 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S15500 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| A 564 XM-12 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 Type XM-12 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 XM-12 | SAE | USA | Age-Hardening Stainless Steel Forgings |
| A 959 Type XM-12 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| SA-564 XM-12 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 Type XM-12 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 Type XM-12 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| 15-5PH | ASTM | USA | High temperature alloys and other special alloys |
| 15-5PH,1.4545,X5CrNiCuNb15-5,S15500 | ASTM | USA | High temperature alloys and other special alloys |
Relevant products
15-5PH Steel Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| 15-5PH Forgrd Flat Bar | Select | 0 | Select | Enquiry |
Enquiry
* Required fields