Location » Home » Grades > Stainless Steels > 00Cr18Ni10N

GB 00Cr18Ni10N Details

00Cr18Ni10N Application:In 00cr19ni10 adding N, on the basis of the above grades also features, use the same as the 0 cr19ni9n, but better intergranular corrosion resistance

Category Type Grade Microstructure Designations
Grades Stainless Steels 00Cr18Ni10N Austenite China - GB , GB 13296 (2007) - Seamless stainless steel tubes for boiler and heat exchanger
GB/T 1220 (1992) - Stainless steel bars
GB/T 14975 (2002) - Stainless steel seamless tubes for structures
GB/T 14976 (2002) - Stainless steel seamless tubes for fluid transport
GB/T 3280 (2007) - Cold rolled stainless steel sheets and plates
GB/T 4237 (1992) - Hot rolled stainless steel sheets and plates
GB/T 4239 (1991) - Cold rolled stainless steel and heat resisting steel strips

Chemical composition(wt.%) of 00Cr18Ni10N grade: GB 13296 (2007)

Elements Min.(≥) Max.(≤) Similar Remarks
C - 0.030
Si - 1.00
Mn - 2.00
P - 0.035
S - 0.030
Ni 8.50 11.50
Cr 17.00 19.00
N 0.12 0.22
00Cr18Ni10N

Mechanical properties of grade 00Cr18Ni10N GB 13296 (2007)

Proof strength
Rp0.2 (MPa)
Tensile strength
Rm (MPa)
Impact energy
KV (J)
Elongation at fracture
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
994 (≥) 413 (≥) 31 12 14 Solution and Aging, Annealing, Ausaging, Q+T,etc 111

Physical properties of grade 00Cr18Ni10N GB 13296 (2007)

Property Density
kg/dm3
Temperature T
°C/F
Specific heat
J / kgK
Thermal conductivity
W/mK
Electric resistance
µΩ·cm
Modulus of elasticity
kN/mm2
Expansion rate
844 (≥) 771 (≥) 34 22 22 Solution and Aging, Annealing, Ausaging, Q+T,etc 341
Temp.
°C/°F
Creep strain limit
(10000h)
(Rp1,0) N/mm2
Creep rupture strength
(10000h)
(Rp1,0) N/mm2
179 786 569

00Cr18Ni10N - Form of Supply

Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED

Cross Reference Table(Equivalent Grade)

Grade Standard Country Application
00Cr18Ni10N GB China
In 00cr19ni10 adding N, on the basis of the above grades also features, use the same as the 0 cr19ni9n, but better intergranular corrosion resistance

Enquiry