SUH 660 WSB Enquiry | Print this page
JIS SUH 660 WSB Details
JIS SUH 660 WSB Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | SUH 660 WSB | Austenite | Japan - JIS , G 4315 (2000) - Stainless steel wires for cold heading and cold forging |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Si | - | 1.00 | ||
| Mn | - | 2.00 | ||
| P | - | 0.04 | ||
| S | - | 0.03 | ||
| Cr | 13.50 | 16.00 | ||
| Ni | 24.00 | 27.00 | ||
| Mo | 1.00 | 1.50 | ||
| V | 0.10 | 0.50 | ||
| Ti | 1.90 | 2.35 | ||
| Al | - | 0.35 | ||
| B | 0.001 | 0.010 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 366 (≥) | 221 (≥) | 33 | 34 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 132 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 483 (≥) | 445 (≥) | 32 | 32 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 444 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 477 | 558 | 312 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| SUH 660 | JIS | Japan | Heat-resisting steel bars and wire rods |
| SUH 660 WSA | JIS | Japan | Stainless steel wires for cold heading and cold forging |
| SUH 660 WSB | JIS | Japan | Stainless steel wires for cold heading and cold forging |
| SUH660 | JIS | Japan | Heat-resisting steel bars and wire rods |
| SUH660 | JIS | Japan | Heat-resisting steel plate, sheet and strip |
| SUH 660WSA | JIS | Japan | Stainless steel wires for cold heading and cold forging |
| SUH 660WSB | JIS | Japan | Stainless steel wires for cold heading and cold forging |