SUH 11 Enquiry | Print this page
JIS SUH 11 Details
JIS SUH 11 Standard Download
SUH 11 Application:Heat-resisting steel bars and wire rods
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | SUH 11 | Martensite | Japan - JIS , G 4311 (2011) - Heat-resisting steel bars and wire rods |
Chemical composition(wt.%) of SUH 11 grade: G 4311 (2011)
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.45 | 0.55 | ||
| Si | 1.00 | 2.00 | ||
| Mn | - | 0.60 | ||
| P | - | 0.03 | ||
| S | - | 0.03 | ||
| Cr | 7.50 | 9.50 | ||
| Ni | - | - | ||
| Mo | - | - |
Mechanical properties of grade SUH 11 G 4311 (2011)
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 712 (≥) | 936 (≥) | 43 | 41 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 313 |
Physical properties of grade SUH 11 G 4311 (2011)
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 945 (≥) | 648 (≥) | 33 | 12 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 121 | 263 | 874 |
SUH 11 - Form of Supply
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| SUH 446 | JIS | Japan | Stainless steel wires |
| SUH 446 | JIS | Japan | Heat-resisting steel bars and wire rods |
| SUH 446 | JIS | Japan | Heat-resisting steel plate, sheet and strip |
| SUH 4 | JIS | Japan | Heat-resisting steel bars and wire rods |
| SUH 409 | JIS | Japan | Heat-resisting steel plate, sheet and strip |
| SUH 409L | JIS | Japan | Heat-resisting steel plate, sheet and strip |
| SUH 11 | JIS | Japan | Heat-resisting steel bars and wire rods |
Enquiry
* Required fields