NCF 750 Enquiry | Print this page
JIS NCF 750 Details
JIS NCF 750 Standard Download
NCF 750 Application:Corrosion-resisting and heat-resisting superalloy bars
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | NCF 750 | Japan - JIS , G 4901 (2008) - Corrosion-resisting and heat-resisting superalloy bars |
Chemical composition(wt.%) of NCF 750 grade: G 4901 (2008)
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Si | - | 0.50 | ||
| Mn | - | 1.00 | ||
| P | - | 0.03 | ||
| S | - | 0.015 | ||
| Cr | 14.00 | 17.00 | ||
| Ni | 70.00 | - | ||
| Cu | - | 0.50 | ||
| Al | 0.40 | 1.00 | ||
| Ti | 2.25 | 2.75 | ||
| Fe | 5.00 | 9.00 | ||
| Nb+Ta | 0.70 | 1.20 |
Mechanical properties of grade NCF 750 G 4901 (2008)
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 368 (≥) | 418 (≥) | 32 | 21 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 |
Physical properties of grade NCF 750 G 4901 (2008)
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 741 (≥) | 651 (≥) | 44 | 44 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 921 | 823 | 735 |
NCF 750 - Form of Supply
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| NCF 750 | JIS | Japan | Corrosion-resisting and heat-resisting superalloy bars |
| NCF 750 | JIS | Japan | Corrosion-resisting and heat-resisting superalloy plates and sheets |
Enquiry
* Required fields