Location » Home » Grades > Stainless Steels > 1.4404

DIN 1.4404 Details

1.4404 Application:DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002

Category Type Grade Microstructure Designations
Grades Stainless Steels 1.4404 Austenite Germany - DIN , DIN EN 10088-1 - Stainless steels - Part 1: List of stainless steels
DIN EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
DIN EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
DIN EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
DIN EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
DIN EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
DIN EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
DIN EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
DIN EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
DIN EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
DIN EN 10272 - Stainless steel bars for pressure purposes
DIN EN 10296-2 (2005) - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
DIN EN 10297-2 (2005) - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
DIN EN 10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
DIN EN 10263-5 - Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
DIN EN 10264-4 (2002) - Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
DIN EN 10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
DIN EN 10270-3 - Steel wire for mechanical springs - Part 3: Stainless spring steel wire
DIN 1654-5 (1989) - Cold heading and cold extruding steels; technical delivery conditions for stainless steels
DIN 17224 (1982) - Stainless steel wire and strip for springs; technical delivery conditions
DIN 17440 (2001) - Stainless steels - Technical delivery conditions for drawn wire
DIN 17440 (1975) - Stainless steels - Technical delivery conditions for drawn wire
DIN 17441 (1997) - Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes
DIN 17455 (1985) - Welded circular tubes of stainless steels for general requirements; technical delivery conditions
DIN 17456 (1985) - Seamless circular tubes of stainless steels for general requirements; technical delivery conditions
DIN 17457 (1985) - Welded circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
DIN 17458 (1985) - Seamless circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
DIN 5512-3 - Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard

Chemical composition(wt.%) of 1.4404 grade: DIN EN 10088-1

Elements Min.(≥) Max.(≤) Similar Remarks
C - 0.07
Si - 1.00
Mn - 2.00
P - 0.045
S - 0.015
Cr 16.5 18.5
Mo 2.00 2.50
Ni 10.0 13.0
N - 0.11
DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002

Mechanical properties of grade 1.4404 DIN EN 10088-1

Proof strength
Rp0.2 (MPa)
Tensile strength
Rm (MPa)
Impact energy
KV (J)
Elongation at fracture
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
472 (≥) 344 (≥) 11 22 22 Solution and Aging, Annealing, Ausaging, Q+T,etc 342

Physical properties of grade 1.4404 DIN EN 10088-1

Property Density
kg/dm3
Temperature T
°C/F
Specific heat
J / kgK
Thermal conductivity
W/mK
Electric resistance
µΩ·cm
Modulus of elasticity
kN/mm2
Expansion rate
261 (≥) 984 (≥) 23 41 44 Solution and Aging, Annealing, Ausaging, Q+T,etc 321
Temp.
°C/°F
Creep strain limit
(10000h)
(Rp1,0) N/mm2
Creep rupture strength
(10000h)
(Rp1,0) N/mm2
811 313 617

1.4404 - Form of Supply

Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED

Cross Reference Table(Equivalent Grade)

Grade Standard Country Application
X2CrNiMo17-12-2 DIN Germany
DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002
1.4404 DIN Germany
DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002
X2CrNiMo17-13-2 DIN Germany
DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002
X2CrNiMo17-12-2 B.S. UK
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
1.4404 B.S. UK
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
X2CrNiMo17-12-2 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4404 AFNOR France
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X2CrNiMo17-12-2 ISO International
Stainless steels - Chemical composition

Relevant products

Enquiry

Please enter the kg or metric tons.
Please be sure to fill in, in order to contact!
Please be sure to fill in, in order to contact!
Please fill in the Size, Quantity, Weight,, etc...

* Required fields