Z4CNDAT13-09 Enquiry | Print this page
AFNOR Z4CNDAT13-09 Details
AFNOR Z4CNDAT13-09 Standard Download
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | Z4CNDAT13-09 | France - AFNOR , NF A 35-574 - Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod NF S 94-090 - Medico-surgical equipment - Materials for ancillary positioning instruments for surgical instrument - Martensitic, precipitation hardening, austenitic and austeno-ferritic stainless steels |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.040 | ||
| Si | - | 0.10 | ||
| Mn | - | 0.20 | ||
| P | - | 0.015 | ||
| S | - | 0.008 | ||
| Cr | 11.50 | 13.50 | ||
| Mo | 1.80 | 2.50 | ||
| Ni | 7.50 | 9.50 | ||
| Al | 0.60 | 1.40 | ||
| Ti | - | 0.40 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 151 (≥) | 395 (≥) | 23 | 32 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 422 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 631 (≥) | 828 (≥) | 41 | 32 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 498 | 382 | 231 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z4CNDAT13-09 | AFNOR | France | Medico-surgical equipment - Materials for ancillary positioning instruments for surgical instrument - Martensitic, precipitation hardening, austenitic and austeno-ferritic stainless steels |