AS 416Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 416 | AS | Australia |
Chemical composition%of the ladle analysis of grade416
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) |
|---|---|---|---|---|---|---|---|
| 0.09-0.15 | 1 | 1.50 | 0.060 | 0.15-0.35 | 12.0-14.0 | Max 1.00 | Max 0.60 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 121(≥) | 182(≥) | 24 | 22 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 314 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 394(≥) | 994(≥) | 21 | 12 | 22 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 431 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 377 | 612 | 991 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH4169 | AS | Australia | Classification and designation for superalloys and high temperature intermetallic materials |
| A 314 S41600 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 581 S41600 | AS | Australia | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S41600 | AS | Australia | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S41600 | AS | Australia | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| F738 Class C4-50 S41600 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class C4-70 S41600 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F836 Class C4-110 S41600 | AS | Australia | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| F836 Class C4-70 S41600 | AS | Australia | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| S41600 | AS | Australia | Martensitic Free-Machining Stainless Steel |
| A 581 S41610 | AS | Australia | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S41610 | AS | Australia | Standard Specification for Free-Machining Stainless Steel Bars |
| S41610 | AS | Australia | Martensitic Chromium Free Machining Stainless Steel |
| A 314 S41623 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 473 S41623 | AS | Australia | Stainless Steel Forgings |
| A 581 S41623 | AS | Australia | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S41623 | AS | Australia | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S41623 | AS | Australia | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| F738 Class C4-50 S41623 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class C4-70 S41623 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |